Meeting called to order by Ira McDonald at 1pm US Eastern. Minutes taken by Ira McDonald.
- Didier Raboud ("OdyX") is going on a 6-month sabbatical and therefore leaving his position as printing guru of Debian. Thorsten Alteholz is overtaking here. OdyX and Till have introduced Thorsten and he has already started off well. - Thanks a lot to OdyX for all his work on Debian's printing part and the great collaboration with Till and to Thorsten for overtaking where OdyX has left off.
- Progress report - Linux Plumbers 2021 is approaching! It will start on Monday next week (20 September 2021) right away with our OpenPrinting micro-conference on the first day! - Yes, our micro-conference will take place on - Monday, September 20, 2021, 7am - 11 am Pacific or 14:00 - 18:00 UTC - The conference is all-online again, as 2020, due to the travel restrictions caused by COVID-19. - We will have the following sessions: - CUPS 2.4/2.5 Presenter: Michael Sweet - CUPS 3.0 Presenter: Michael Sweet - Print Management GUI Presenter: Till Kamppeter - Common Print Dialog Backends Presenter: Till Kamppeter - Printer/Scanner Driver Design and Development Presenter: Till Kamppeter - Scanning in PAPPL Presenter: Bhavna Kosta - Note that these sessions are not just slide presentations. There are some slides to introduce into the subject matter, but as the Linux Plumbers micro-conferences are intended for, we will discuss about issues, decisions, design, ... to put our future work into the right direction, and for answering questions from the attendees. - The exact schedule is posted on the Linux Plumbers web site. Registered attendees can participate interactively in the live discussions. Probably there will also be the possibility for non-interactive watching of the micro-conference on YouTube and a recording on YouTube after the micro-conference, as happened last year.
- Once a week, every Thursday in the US morning and the European afternoon, on the "Ubuntu OnAir" YouTube channel of the Ubuntu community, the live event "Ubuntu Office Hours" is taking place. In each episode a free software community memeber is invited to tell about his project and what is happening in its community. - In the October 7 episode (3 weeks from today) it is all about OpenPrinting. Organizer and host Monica Ayhens-Madon has invited Till to talk about GSoC and the students Till has mentored. There will not only Monica and Till be on the (virtual) stage but also OpenPrinting program manager Aveek Basu and some of this year's (and perhaps also former year's) GSoC students. - We will talk about our GSoC work and its achievements, not only of code but also the community growth, and what students have done after the summer, like mentoring the next students or creating our current web site. - We will also call for volunteers to join OpenPrinting and to contribute, and also answer the spectators' questions which they post on the YouTube Live Chat of the session. - Please mark in your calendars: - Thursday, October 7, 2021, 17:00 - 18:00 UTC - It will take place on YouTube and everyone can participate, without registration and free of charge. Everyone can post questions on the YouTube Live Chat. - For everyone who wants to get some technical background, Michael Sweet and Till also talked about the ongoing changes in the architecture of printing with free software three weeks ago in the Ubuntu Indaba (recording on YouTube). - See you there!
- Progress report - 600 printers certified for IPP Everywhere v1.0 - 152 printers certified for IPP Everywhere v1.1
- Progress report - No update
- Progress report - No update
- Progress report - No update
- Progress report - Current PAPPL release is v1.1b1 on 31 August 2021. - The first beta release of PAPPL v1.1 is now available for download. PAPPL v1.1 adds support for Wi-Fi configuration, IPP-USB, printer driver lookup and auto-add functionality, improves management of multiple printers, and adds support for Microsoft® Windows® 10 and higher. - Changes in v1.1b1 include: - Added support for Windows 10 and higher. - Added PAPPL_SOPTIONS_NO_TLS option to disable TLS support. - Added Wi-Fi callbacks to support configuration over IPP-USB (Issue #45) - Added buttons and sub-commands to pause and resume printers (Issue #124) - papplMainLoop now uses a persistent location for state and spool files by default (Issue #128) - papplMainLoop now supports clients talking to a system-wide server running as root (Issue #148) - Added a "set default" button to the web interface (Issue #150) - The drivers sub-command now reports the IEEE-1284 device ID for a given driver (Issue #157) - Jobs can now be canceled and printers deleted when a processing job is trying to connect to a printer (Issue #163) - The default media is now updated if the ready media for a given tray is updated (Issue #164) - Fixed an issue with the "drivers" sub-command not working if you don't have a system callback. - Fixed a deadlock issue on macOS. - Added a new papplJobCreateWithFile API to allow printer applications to submit print jobs internally. - Refactored the papplSystem hostname/port APIs to be consistent with the naming used for the papplClient APIs. - Changes planned for v1.1b2 include: - Added support for `papplDeviceGetID` with network devices (Issue #95) - Added support for the "compression" option. - Added English names for Tabloid and A3 media sizes in the web interface. - Added "server-hostname" and "listen-hostname" server options to the default mainloop system callback. - Fixed support for default printers, added indicator in web interface (Issue #182) - Fixed support for printers with spaces in their names. - Fixed the "jobs" subcommand. - Fixed support for page-ranges. - Fixed support for printers that do PDF beyond converting it to raster. - Fixed support for mainloop subcommands on Windows. - Fixed error message when Bonjour for Windows is not installed.
- Progress report - No update
- Progress report - Printer Applications retro-fitting classic CUPS printer drivers consisting of PPD files, CUPS filters, and CUPS backends, like currently the PostScript, Ghostscript, and HPLIP Printer Applications, have a lot in common and share most of their code. Therefore Till has continued the development of the code of the PostScript Printer Application by generalizing it for any type of classic CUPS printer driver (see previous News posts and the sneak previews of Till's work during the last months) and put it up on the OpenPrinting GitHub as the PAPPL Retro-Fit Library. - This library will also be the start of several other CUPS driver retro-fits making all the drivers from the last (even more than) 21 years available for the new all-IPP, PPD-less printing architecture. 21 years ago, Till migrated all printer drivers into CUPS, now he is migrating them into the next architecture. - The library makes creating a Snap of a CUPS driver as easy as creating a Snap of any other application. It contains 98% of the C code needed to create a PAPPL-based Printer Application around the CUPS driver. Only C code still needed is a main() function stub setting the configuration of the Printer Applications (which features are used, which are the resource/log/spool/state directories?) and perhaps a printer auto-discovery function (Which printers are supported?). Otherwise one needs only the driver with all its files and some extra packages like Ghostscript, libcups, libcupsfilters, libppd, ... - The driver's files (PPDs, filters, backends) only need to get placed in the appropriate directories for the Printer Application to find them. No need to change the code of the drivers, so it is also easy to retro-fit unmaintained drivers, drivers for which one does not have an appropriate printer to test, and even proprietary, closed-source, binary-only drivers. - Then one can create print queues with the printers being auto-discovered (by PAPPL's backend and/or included CUPS backends) and the model/driver (PPD file) can be automatically or manually selected (each "Driver Name" drop-down entry on the "Add Printer" web interface page is one PPD file). - When printing a job the IPP attributes are automatically mapped to the best-fitting PPD option settings, to easily allow to make use of the features of the printer, even on clients with limited print dialogs, like phones or IoT devices. The web interface also allows to manually set defaults for all PPD options for more detailed control. Even options requiring CUPS PPD extensions, numeric, string, password, fax number, ... options are supported. - All current retro-fitting Printer Applications (PostScript, Ghostscript, and HPLIP) are using this library now. - The Printer Applications created with this library can also be run directly on the system, without being in a Snap, especially the Test Printer Application which comes with the library and sets its resource directories to use all the PPD files, filters, and backends of the system’s classic CUPS installation. This allows testing installed drivers how they work under a Printer Application or allows installed drivers to be used with an installed CUPS Snap. - All important features are included now. Further development of the library will go with the development of PAPPL and the needs of the Printer Applications. Especially the following features will get implemented/supported as soon as they are implemented/fixed in PAPPL: - Support for string/text-style vendor options. Needs support in PAPPL (Patch already applied in the Printer Application Snaps). - Human-readable strings for vendor options. Needs support in PAPPL. - Ink level check via ps_status() function. Needs support in PAPPL.
- Progress Report - Ghostscript Printer Application in the Snap Store, 194 installations via Snap Store - If you want to use an (older) printer which is not a modern driverless IPP printer and is also not a PostScript printer (which would be supported by the PostScript Printer Application then) Then this is the right Printer Application for you. - It supports ~5000 different printer models, mainly with drivers from the well-known Ghostscript but also some others. The printer model support is based on OpenPrinting's printer support database (Foomatic). Especially many standard laser (PCL 6/XL, PCL 5c/e, PCL4) and dot matrix (ESC/P, OKI, IBM, ...) but also many printers with proprietary print data formats are supported. There are not only model-specific entries to choose from, but also generic entries for the common formats for the case your printer is not explicitly listed. - The Printer Application gives access to all the options of the former PPD files inside its web interface ("Device Settings", "Media", "Printing Defaults") but can be easily used from any IPP-compliant client application or device. The standard IPP attributes are automatically converted to the best-fitting PPD option settings, especially for color, quality, and content optimization. - These drivers already ship for many years with most common Linux distributions (Ubuntu, Debian, Fedora, SUSE, ...) and have made many user's printers work and these printers will continue to work in environments where only Printer Applications (and no classic printer driver packages) are supported. - In the future more drivers will get added to the Snap of this Printer Application, especially smaller, unmaintained driver projects for which it does not make much sense to clutter the Snap Store with another Printer Application.
- Progress Report - HPLIP Printer Application in the Snap Store, 616 installations via Snap Store - Right after having published the Ghostscript Printer Application I have continued with the HPLIP Printer Application, to cover the printers supported by the printer driver of HPLIP. - Creating this one was much more complex than the Ghostscript Printer Application as HPLIP is a suite of printer drivers, PostScript PPD files (with extra CUPS filters), scanner drivers and command-line and GUI utilities. It also has many quirks like excessive use of hard-coded absolute file paths in the source code, utilities written in Python, an x86-32/64-only binary-only code blob in the driver ... while Ghostscript and Foomatic are much more packaging-friendly. - As scanning support in PAPPL is not ready yet, scanning on multi-function printers is not yet supported. Also loading the proprietary driver plugin will be added later. - Printing is now possible on all non-PostScript and PostScript printers from HP and Apollo which HPLIP supports without its proprietary plugin. More than 3000 different models from ~30 years. - For maximum compatibility both PAPPL's standard backends and the "hp" backend of HPLIP are available, the former for bi-directional access (poll accessory configuration settings of PostScript Printers), the latter for simultaneous printing and scanning on the same device and perhaps also special needs of some printer models. - Note that HP is one of the best manufacturers in terms of supporting driverless IPP printing and scanning, so most newer HP printers work best without this Printer Application, even if HPLIP (and so this Printer Application) supports them. - Note also that HPLIP has many bugs which are fixed in the Debian/Ubuntu and RedHat/Fedora packages by a high amount of distribution patches whereas this Printer Application uses the "raw" upstream source code. I will soon switch to the packaging GIT repository of Debian, as soon as the new Debian printing maintainer has updated it to version 3.21.8.
- Progress Report - PostScript Printer Application in the Snap Store, Call for testing on the snapcraft.io forum and on the Ubuntu Discourse, 1484 installations via Snap Store - The PostScript Printer Application is now switched over to use the new PAPPL Retro-Fit Library. - This means that now we have fully automatic mapping of job IPP attributes to the best-fitting PPD option settings to make printing as easy as possible with standardised user-settable options and from any client device including phones. - Also most of the development and debugging happens centrally in the retro-fit library. - Note that HP’s PostScript PPD files are in both this and the HPLIP Printer Application now. This should make the life easier for users. Some do not know whether their printer is PostScript, but it is from HP, so the HPLIP Printer Application will always work, others have a bunch of PostScript printers of different manufacturers, including HP, they will be able to support them all with a single Printer Application.
- Progress report - No update.
- Progress report - CUPS Snap in the Snap Store, Call for testing on the snapcraft.io forum and on the Ubuntu Discourse, 2564 installations via Snap Store - Till is still waiting for the snapd team to implement the security concept on the snapd side, but unfortunately, they are very busy currently. - But Till has good news now: Till has talked with them about when he can expect the merging into snapd and they say that they will do it in October, so that for the full developemnt cycle of Ubuntu 22.04 LTS (J. J.), starting end of October, it will be available for testing and deciding whether said Ubuntu version will come with the CUPS Snap as standard printing environment, and naturally uploading of applications which print into the Snap Store will get easy and fully automatic, without any manual review and permission needs. - Main TODOs are: - Complete the security concept on the snapd side, especially implement the content interfaces (see above) - Testing - Turn classic CUPS drivers into Printer Applications (see progress below) - Add a migration script so that OS distributions can easily switch over from classic packages to the CUPS Snap
- CUPS (Mike) - Current release is OP CUPS v2.3.3op2 on 1 February 2021. - Development of CUPS 2.4 is in progress, currently mainly fixing of bugs which were reported to Apple's CUPS GitHub in the last 19 months. - Ubuntu Impish Indri (21.10, Feature Freeze next week) will also come with CUPS 2.3.3op2. The CUPS Snap and the PostScript Printer Application Snap use the current GitHub master. - The CUPS in Impish Indri has a distribution patch porting the fully automatic job-IPP-attribute-to-PPD-option-settings mapping from cups-filters, which we use in all retro-fitting Printer Applications to CUPS, so that when sharing a print queue under the new Ubuntu one has the same ease of printing to it from any device, especially phones. A Pull Request for upstream inclusion of this feature is posted and under discussion. - There will be news and discussion about CUPS 2.4.x and 3.x with Michael Sweet on the OpenPrinting Micro-Conference on the Linux Plumbers 2021 on Monday (20 September 2021). - CUPS v2.4rc1 planned changes (Mike) - Fixed documentation and added examples for CUPS' limited CGI support (Apple #5940) - Fixed the `lpc` command prompt (Apple #5946) - Stubbed out deprecated `httpMD5` functions. - Printer driver deprecation wasn't mentioned in CUPS Web UI - CUPS Filters Summary (Till) - Current release is v1.28.10 on 17 August 2021 - Current development work is finishing up, testing, debugging this year's GSoC student projects, improving and optimizing the rules for mapping job IPP attributes to PPD option settings, and smaller feature needs appearing during the CUPD driver retro-fitting work (but most is already done for this). Now we also need to clean up and sort out things to be able to do a first 2.x release of cups-filters. - Improved the auto-mapping of job IPP attributes to PPD option settings (presets). Several new rules added during further driver retro-fitting work, especially also for Foomatic's "PrintoutMode" composite option. - The GSoC students have completed conversion of the filters into filter functions and making the filter functions also use job and printer IPP attributes as alternative to PPDs and option settings. - A Pull Request for a single, universal CUPS filter, calling sequences of filter functions, reducing external function calls, is posted and shortly before merging. - Support for the print-rendering-intent IPP attribute in filter functions. - Use of log function for the log messages produced by the color-management-related functions of libcupsfilters. - In the ieee1284NormalizeMakeAndModel() function extract driver info with regular expression (needed by libpappl-retrofit). - In filterExternalCUPS() sanitize the device URI (for CUPS backends) and env variables to assure that passwords do not get into log files. - Also several minor bug fixes were done. - CUPS Filters release v2.0.0 planned changes (Till) - foomatic-rip: Debug message was wrongly sent to stdout and not to log (Issue #422). - libcupsfilters: In ghostscript() pass on LD_LIBRARY_PATH to Ghostscript - libcupsfilters: In color-management-related functions use the log function instead of logging right to stderr. - libcupsfilters: In ieee1284NormalizeMakeAndModel() extract driver info with regular expression. - libcupsfilters: Support print-rendering-intent IPP attribute in ghostscript(), mupdftoraster(), and pdftoraster() filter functions. - libcupsfilters, mupdftoraster: Moved core functionality of mupdftoraster into the mupdftoraster() filter function (Pull request #412). - textbrftoindex: Fix control character filtering (Pull request #409) - libcupsfilters, bannertopdf: Moved core functionality of bannertopdf into the bannertopdf() filter function (Pull request #407). - libcupsfilters: Also allow supplying a regular expression to extract driver information when the input string is a PPD's *NickName. - CUPS Filters release v1.28.11 planned changes (Till) - foomatic-rip: Debug message was wrongly sent to stdout and not to log (Issue #422). - CUPS Filters release v1.28.10 on 17 August 2021 (Till) - Bug fix release, fixes backported from the master (2.x) branch - Ubuntu Impish Indri (21.10) will come with cups-filters 1.28.10. The CUPS Snap currently uses v1.28.10. The PostScript Printer Application Snap uses the current GIT master of cups-filters. - Sample PPDs: Add borderless page size definitions to Generic PDF Printer, HP Color LaserJet CM3530 MFP PDF, and Ricoh PDF Printer PPD files. - Sample PPDs: From the PDF PPD files removed the unneeded "*cupsFilters2: ..." line. For CUPS it does not make any difference. - libcupsfilters: Fixed pdftopdf filter to correctly support page ranges without upper limit, like "10-" (Pull request #399). - libcupsfilters: Use wildcard tag (IPP_TAG_ZERO) search for "media-type" and "media-type-supported" in the PPD generator (Pull request #398). - implicitclass, parallel: Added missing newlines at error messages. - libfontembed: Removed unneeded fontembed/main.c and ttfread executable. Eliminates the dependency on DejaVuSans.ttf (Issue #386). - gstoraster: Refactor the filter a little to clarify handling of page counts and set job-impressions for TotalPageCount in PWG-Raster header (Pull request #394). - cups-browsed: Make NotifLeaseDuration configurable and renew after half the lease duration not 60 sec before end. The early renewal improves reliability on busy systems a lot. For easier development and debugging short durations from 300 sec on can get selected (Pull request #378).
- GSoC 2021 - The Google Summer of Code 2021 has ended successfully for OpenPrinting! All our 5 students have passed final evaluations and did great work. The projects are mostly completed, only some debugging and polishing is currently taking place. Most of the code is already committed to the respective upstream GIT repositories (and partially already in use in the CUPS-driver-retro-fitting Printer Application Snaps). - There was a presentation of the GSoC projects on the PWG August 2021 Face-to-Face Meeting which took place online on August 17-19, 2021. There we have shown a video where every student has presented his/her project. - Here are the projects with their submitted work product links: cups-filters: Make sure all filter functions work without PPD files Student: Suraj Kulriya Mentors: Jai Luthra, Till Kamppeter, Dheeraj Yadav Work Product: https://surajkulriya.medium.com/gsoc-2021-final-work-product-the-linux-foundation-make-printing-work-through-cups-without-bf06dbfa1789 PASSED cups-filters: Convert filters to filter functions Student: Pratyush Ranjan Mentors: Till Kamppeter, Dheeraj Yadav Work Product: https://pranjanpr.github.io/pratyush/#/gsoc PASSED cups-filters: Create a single, universal CUPS filter to replace the chain of individual filters Student: Pranshu Kharkwal Mentors: Till Kamppeter, Dheeraj Yadav Work Product: https://gist.github.com/pranshukharkwal/9413499a6744049ef549159948392023 PASSED GUI for listing and managing available IPP Print/Scan services (or DNS-SD-advertised network services in general) Student: Divyasheel Mentors: Till Kamppeter Work Product: https://github.com/divyashk/GSOC21_summary PASSED PAPPL: Printer setup tool support and Scanning support Student: Bhavna Kosta Mentors: Jai Luthra, Till Kamppeter, Michael Sweet Work Product: https://github.com/Bhavna2020/GSoC-2021 PASSED - GSoC 2021 Timeline - DONE - 29 January 2021 - Organization Applications Open - Open source organizations that would like to participate as a mentor organization in this year's program can apply. - DONE - 19 February 2021 - Organization Application Deadline - All organizations wishing to be a part of GSoC 2021 must complete their applications. - DONE - 9 March 2021 - Organizations Announced - Linux Foundation accepted! - Interested students can now begin discussing project ideas with accepted mentor organizations. - DONE - 29 March 2021 to 13 April 2021 - Student Application Period - Students can register and submit their applications to mentor organizations. - DONE - 13 April 2021 to 17 May 2021 - Application Review Period - Organizations review and select student proposals. - DONE - 17 May 2021 - Student Projects Announced - Accepted students are paired with a mentor and start planning their projects and milestones. - DONE - 17 May 2021 to 7 June 2021 - Community Bonding - Students spend a month learning more about their organization’s community. - DONE - 12-16 July 2021 - Evaluations - Mentors and students submit their evaluations of one another. - DONE - 7 June 2021 to 16 August 2021 - Coding - Students work on their Google Summer of Code projects. - DONE - 16-23 August 2021 - Students Submit Code and Final Evaluations - Students submit their code, project summaries, and final evaluations of their mentors. - DONE - 23-30 August 2021 - Mentors Submit Final Evaluations - Mentors review student code samples and determine if the students have successfully completed their Google Summer of Code 2021 project. - DONE - 31 August 2021 - Results Announced - Students are notified of the pass/fail status of their Google Summer of Code 2021 projects.
- GSoD 2021 - With our application for this year’s Google Season of Docs, we did not get accepted.
- PWG Virtual F2F - 17-19 August 2021 - Ira/Aveek to attend - https://www.pwg.org/chair/meeting-info/meetings.html - Status of AMSC and ISO liaisons w/ PWG (Paul Tykodi) - http://ftp.pwg.org/pub/pwg/general/sc/pwg-sc-call-minutes-20210628.htm - http://ftp.pwg.org/pub/pwg/general/sc/pwg-sc-call-minutes-20210726.htm - http://ftp.pwg.org/pub/pwg/general/sc/pwg-sc-call-minutes-20210823.htm - see PWG Steering Committee minutes from 06/28/21, 07/26/21, 08/23/21 - PWG Hardcopy Device Security Guidelines v1.0 - Interim draft - https://ftp.pwg.org/pub/pwg/ids/wd/wd-idshcdsec10-20210504-rev.pdf - for a Best Practice - Smith sent WiFi contributions on 14 December 2020 - PWG F2F review on 6 May 2021 - Schedule - Prototype draft in Q1/Q2 2022 - IPP Everywhere v1.1 Printer Self-Certification Tools Update 3 (Mike) - https://www.pwg.org/archives/ipp/2021/020938.html - HP and Lexmark feedback on the document format tests - for Update 3 - v1.1 Tools Update 3 approved on 16 June 2021 - v1.1 Tools Update 4 pending for bug in results submission tool - IPP Everywhere v1.1 certifications required after 1 July 2021 - IPP Workgroup Charter (Ira) - PWG Approved - http://ftp.pwg.org/pub/pwg/ipp/charter/ch-ipp-charter-20210409.pdf - update for new IPP WG projects - PWG Approved on 9 April 2021 - IPP INFRA Cloud Proxy Registration (Cihan, Mike) - proposed - https://www.pwg.org/archives/ipp/2020/020688.html - https://ftp.pwg.org/pub/pwg/ipp/slides/ipp-wg-agenda-november-20.pdf - for a Registration (near-term) - minor update of IPP System Service and IPP Infrastructure Printing - offline discussions with Microsoft about Universal Printing coherence - PWG Virtual F2F discussion on 6 May 2021 - Schedule - TBD - IPP Production Printing Ext v2.0 (Mike) - Prototype draft - https://ftp.pwg.org/pub/pwg/ipp/wd/wd-ippppx20-20210817-rev.pdf - for a Candidate Standard - major update of PWG 5100.3-2001 - PWG review at PWG Virtual F2F in August 2021 - completed - Waiting on prototyping in ippsample - Schedule - Stable draft in Q3/Q4 2021 - IPP Finishings v3.0 (Smith) - Prototype draft - https://ftp.pwg.org/pub/pwg/ipp/wd/wd-ippfinishings30-20210902-rev.pdf - for a Candidate Standard - major update of PWG 5100.1-2017 - PWG Virtual F2F status on 5 May 2021 - IPP WG review on 09/02/21 - completed - Schedule - Stable draft in Q4 2021 - IPP Enterprise Printing Extensions v2.0 (Smith) - Prototype draft - https://ftp.pwg.org/pub/pwg/ipp/wd/wd-ippepx20-20210423-rev.pdf - for a Candidate Standard - major update of PWG 5100.11-2010 - PWG review at PWG Virtual F2F in August 2021 - completed - Schedule - Stable draft in Q4 2021 - IPP Driverless Printing Extensions v2.0 (Smith) - Interim draft - https://ftp.pwg.org/pub/pwg/ipp/wd-ippnodriver20-20210501-rev.pdf - for a Candidate Standard - major update of PWG 5100.13-2012 - PWG review at PWG Virtual F2F in August 2021 - completed - Schedule - Prototype draft in Q4 2021 - IPP Encrypted Jobs and Documents (Mike/Smith) - Prototype draft - https://ftp.pwg.org/pub/pwg/ipp/wd/wd-ipptrustnoone10-20210519-rev.pdf - for a Candidate Standard - PWG discussion at PWG Virtual F2F in August 2021 - Waiting for prototyping - Schedule - Stable draft in Q1 2022 - IPP 2.x (Mike/Ira) - Prototype draft - https://ftp.pwg.org/pub/pwg/ipp/wd/wd-ippbase23-20210424.pdf - https://github.com/istopwg/ippsample/wiki/Planned-PWG-Errata-Updates - major update of PWG 5100.12-2015 - point to new IPP PPX, EPX etc. - PWG review at PWG Virtual F2F in August 2021 - completed - Schedule - Stable draft in Q1 2022 - IPP Everywhere v2.0 (Mike/Ira - https://github.com/istopwg/ippsample/wiki/Planned-PWG-Errata-Updates - Major update - for a Candidate Standard - Add TLS/1.2 and/or TLS/1.3, Privacy, Job Accounting as Mandatory - Add Feature definitions for "vertical solution" use cases - Define a complete IPP Everywhere MFD (add Scan, FaxOut, System services) - Define tests to certify standard common features - PWG discussion at PWG Virtual F2F in August 2021 - Make IPP Everywhere 2.0 print-only, defer IPP Everywhere MFD until IPP Scan is deployed - 2.0 = 1.1 + TLS + privacy + job account + system service for servers - Defer cloud, finishings, auth methods, job release, job storage, etc. to 2.1 - Schedule – TBD
- ISO TC22/SC32/WG12 Virtual F2F - 13-14 September 2021 - Ira to attended - https://www.iso.org/standard/77796.html (ISO 24089 Road Vehicles Software Update) - ISO TC22/SC32/WG12 Adhoc Virtual F2F - 28 September 2021 - Ira to attend - https://www.iso.org/standard/77796.html (ISO 24089 Road Vehicles Software Update) - TCG Members Meeting Virtual F2F - 11-15 October 2021 - Ira to attend - https://trustedcomputinggroup.org/ - ISO TC22/SC32/WG12 Adhoc Virtual F2F - 19 October 2021 - Ira to attend - https://www.iso.org/standard/77796.html (ISO 24089 Road Vehicles Software Update) - PWG Virtual F2F - 2-4 November 2021 - Ira to attend - https://www.pwg.org/chair/meeting-info/meetings.html - IETF 112 Virtual F2F - 8-12 November 2021 - Ira to attend - https://www.ietf.org/how/meetings/112/ - IEEE 1609 Virtual F2F - 9 November 2021 - Ira to attend - https://standards.ieee.org/develop/wg/1609.html
Open Action Items
Next OP US/Europe/Brazil/India Conference Calls
- Tuesday 5 October 2021, Daytime - Web conference to be announced - Note - TCG Members Meeting Virtual F2F - 11-15 October 2021 - Ira to attend - US 10am in San Francisco - US PDT (Pacific Daylight Time) 11am in Colorado - US MDT (Mountain Daylight Time) 12am in Chicago - US CDT (Central Daylight Time) 1pm in New York - US EDT (Eastern Daylight Time) - Europe 7pm in Berlin - CEST (Central Europe Summer Time) - Brazil 2pm in Belo Horizonte - BRT (Brasilia Time) - India 10:30pm in New Delhi - IST (India Standard Time)
- Tuesday 16 November 2021, Daytime - Web conference to be announced - Note - European Summer Time ends on 31 October 2021 - Note - US Daylight Savings Time ends on 7 November 2021 - Note - PWG Virtual F2F - 2-4 November 2021 - Ira to attend - Note - IETF 112 Virtual F2F - 8-12 November 2021 - Ira to attend - Note - IEEE 1609 Virtual F2F - 9 November 2021 - Ira to attend - US 10am in San Francisco - US PST (Pacific Standard Time) 11am in Colorado - US MST (Mountain Standard Time) 12am in Chicago - US CST (Central Standard Time) 1pm in New York - US EST (Eastern Standard Time) - Europe 7pm in Berlin - CET (Central Europe Time) - Brazil 3pm in Belo Horizonte - BRT (Brasilia Time) - India 11:30pm in New Delhi - IST (India Standard Time)
- Tuesday 7 December 2021, Daytime - Web conference to be announced - Note - European Summer Time ends on 31 October 2021 - Note - US Daylight Savings Time ends on 7 November 2021 - Note - PWG Virtual F2F - 2-4 November 2021 - Ira to attend - Note - IETF 112 Virtual F2F - 8-12 November 2021 - Ira to attend - Note - IEEE 1609 Virtual F2F - 9 November 2021 - Ira to attend - US 10am in San Francisco - US PST (Pacific Standard Time) 11am in Colorado - US MST (Mountain Standard Time) 12am in Chicago - US CST (Central Standard Time) 1pm in New York - US EST (Eastern Standard Time) - Europe 7pm in Berlin - CET (Central Europe Time) - Brazil 3pm in Belo Horizonte - BRT (Brasilia Time) - India 11:30pm in New Delhi - IST (India Standard Time)